Software restore Canon MP series and Canon IP 6200 Series

How to reset printer Canon MP series actually easy but also difficult, surely many of you have experienced things like that. In fact there are simple and easy, you want to know how, we are simply trying to tips-triks reseter following :

* Make sure your printer in a condition with no cash flow listik (Printer Power cable pull you already) leave a few seconds.
* Once you Plug the power cable to the back post but before you enter in place of paper, then as you press the instructions below :

1. Swicth button stop / reset 2x.
2. Wait until the indicator light shows the number 0 (Zero).
3. Then press the stop / reset 1x.
4. Press power 1x (it will print test 1x).
5. Press button again stop / reset 2x.
6. Press 1x power swicth (test print again).
7. Press stop / reset 3x.
8. Press key swicth power 1x (no process print).
9. Press button stop / reset 4x.
10. Press the power 1x (no process print).
11. After all process is finished turn off the printer and pull the power cable and you're back nyalahkan like to buy a new printer.

On the way I have been trying to own and successfully, but when you try and stay not mean that you have not been successful in luck.

But you need not worry or despair, you can try to pull a software restore, it also has its own way try and the results are not disappointing. If you want to prove yourself, please download the tool's software restore Printer Canon MP Series for the type and IP6210D - IP6220, but for the IP model is I have never tried to own Printer had not found that kind. This software can only be in use on Printer model Canon MP150, MP170 and MP450 and Canon IP6210D, IP6220D, IP2200 and IP1600 only.

Link Download Software restore iP6210D-iP6220 & MP series.

Read more »

Software Resetter Printer Canon Pixma

How to Resetter Printer Pixma Ip 1900 Series with the Software Resetter Pixma Ip 1800 Series?

If your printer Blink orange color usually there are 2 possibilities that you need to do that is:

1. Problems in the Catrigde: To determine whether Catrigde is really in trouble or not you can borrow with a friend, relative, or anyone you know. When the correct Catrigde is damaged, you can directly replace.
2. Problems of this type of printer should ask in return is usually reset at the time multiple print several thousand pieces process print.

To Resetter steps you can use the manual way, do the following
* Turn off the printer, and pull the electrical cable.
* Press and hold POWER button on the printer by using the index finger.
* Replace the electrical cable but still the index finger
Power button.
* Use the middle finger to press the Resume button as much as 2x.
* Remove your index finger from the button POWER. The printer will be detected again as a new printer or light the orange led was back again as the led light is green again.
* You have completed the first phase to reset Ink Tank Full.

How to use the manual system, in this way can not be completed because of problems in the power cable on the loose and we would definitely use again led the Orange will be back again. If the printer you want to work as you have to use the Software Resetter.

To use Software Resetter you can use Resetter for Canon Pixma Ip 1800 Series, for that you can follow the following steps:

1. You use the manual way first so that the printer can identify the port by your computer, for that you follow the above first.
2. After a successful manual if you have not yet Resetter Software you can Download here.
3. Once your software is already extract.
4. The next step you open Resetter Ip 1800 Series is the earlier you earlier and then click Extract files GeneralTool click 2x Usb port with the printer is recognized by the Software.
5. The next step you click the Device Id.
6. Then check on the Cleaning and EEPROM Clear.
7. Next you click the Test Pattern 1 leave for the process running, if the indicator light will indicate the color Orange led you press the button as much as 2 x Resume ago leave until there is no process at all. If it is less sure you can click the Test Pattern 2 with a sheet of paper up in the printer is, why you should have on paper for the printer at the time of the Test Pattern 1, 2 and 3 indicator lights will turn on the color Orange have already indicated whether or not paper when there is no paper you can use the Resume button 2x to skip the print process.

Important Note: We recommend you use the Software Resetter type 1800 Series to their type of type Printer Canon Pixma Ip 1900 Series let alone until you press the type Ip 1800 Printer Driver then you will be changed in accordance with that before you select the driver was the Canon Pixma Ip 1900 series will be changed to Canon Pixma Ip 1800 Series with the other words are no longer fit the original brand. A little extra: Resetter such a process is finished you turn off the printer and hold power cable let loose a few seconds ago you back Plug power cable and then you turn to leave again led indicator lights green. You can use the printer. When the print process led lights showed green color orange, and alternately in the monitor showed that the cartridge (Black or color) you can overcome your problem by pressing the button Resume for 3-5 seconds then release let the process run until finished.

Read more »

Wast ink absorber is full

Have on hand a flashlight and some table napkins or lint-free tissues
Open up the lid of your Printer Canon Pixma MP Series.
The cartridge carriage will move to the left (The position in which you change cartridges)
With the torch look inside the right hand corner at the end of the print head track

At the end of the track are two foam pads about 2cm x 1cm sitting together
Fold the table napkin or heavy lint free tisa good tosue into a pad about 2 cm
With the pad in your right hand and the torch in your left
reach inside the machine with the tissue and
gently press the tissue into the absorber pads (repeat if necesary)
Do not take too long as the printer heads return after a minute or so.
If the printer heads return and you get your hand out in time
just close the lid and open it again and you have more time
when you judge the tissue has absorbed enough ink from the sodden absorbers
and the absorbers are grey looking instead of blackish
swith off the torch and find a place to put the ink-sodden tissue (WPB, Floor File, trash)
close up the lid again and reset the indicator (here's how:)
press "menu"
press in succession "scan - copy - scan"
The indicator window will tell you you are in "service mode"
(you have invaded techie territory )
press the ' >" ( +) key until "NVRAM" displays
press "OK" (you have entered the inner sanctum )
press the ">" key until ABS-M or ABS-P appears on the display
press OK and "1" should appear
press " - " (the minus key) and it should change to "0"
Now you have to reset both pads separately, so you do the other one.
When you have reset both ABS-M and ABS-P, heave a sigh of relief
and press the "STOP" button and the display will be back to normal
and nobody need ever know you have been in the techie zone.
Act innocent -
you have defeated a poor design feature exclusive to Canon designed to impoversih you
you have saved yourself the angst of buying and installing a new printer
you have beaten the system.

Read more »

Software for saving ink with the Ink Saver

Would you like to print document much in one day? it is not necessary if there are undecided how to create software to save your printer ink, count count the savings can save you a spendthrift who is always a buy ink. Savings can set our own at will.

So we can scrimp for monthly expenses like ink & print at your heart. Software is suitable for all type printers Injek any trademark, too. Create a want to try, please download it below :
Click Here --> Download link


You must add the type of printer if there are many brands on the ADD>> all future brand / type of printer is recognized in the software process Inksaver.setelah finished intall must enter your code / path had already been in one download insaver.zip

How to enter a code / path but before you Extract zip file to turn off (non aktive) anti-virus you soalnya path is considered to be viruses. Open the path to the menu and select Activate!

File already exist. Overwrite press yes. After that you need not enter a user name or code again, you select Try to stay, because softwre Inksaver tersebit already in the path. Congratulations to work without the burden of headache akan you this month.

Read more »

Error on HP Deskjet printers

Are you having problems on the blink led meshed brand HP Deskjet printer? damage is caused by damage to the cartridge. My own experience is often a problem on the cartridge, but recently I experienced the same brand as the printer is Hp meshed led blink indicates a damaged cartridge. To make sure I take cartidge that is still normal, I plug in the printer. What actually happens is still meshed printer blink or even vice versa is not impermeable blink again?

In fact the result remains the same what I earlier estimate all wrong and you certainly also the damage to the cartridge as I expected earlier allegations that one of my major. Want to know what is causing the printer remains impermeable blink led lamp, the damage is located on the cartidge. For you who have experienced things that I experienced Searched should first make sure you do the damage on your printer. If you are experiencing the same case that is meshed power led blink you should borrow a cartridge in the normal intercourse, can be co-workers, friends close to you, kost friend or anyone close to you before you surely correct damage to your printer. This damage not only on the HP Deskjet printer brand only, but it also can be on any brand printer deskjet.

A few additional ways Cartridge resetter Hp fact tone that no HP printer brand does not actually have the software
resetternya to make us use it manually. This is a manual resetternya

Step by step how to reset cartridge HP:

1. Scotch tape close to the first point 2 in the color blue catridge. (how close depends on the point type catridge)
2. Open the printer ago close of entries on the catridge printer. Close again
3. Usually, the printer does not directly blink
4. Go back and pull Scotch tape catridge attached
5. Close 2 a point with the color green Scotch tape
6. Open the printer ago close of entries on the catridge printer. Close again
7. Go back and pull Scotch tape catridge attached
8. Catridge already can be used.

Hopefully these tips and tricks beneficial for you.

Read more »